Electronic Equipment
Test Equipment- Tektronix TDS2014B 4 channel 100 MHz Digital Storage Osciloscope.
- Fluke 8845A 6.5 digit multimeter.
- Fluke 714 thermocouple calibrator. NIST traceable calibration.
- Fluke 179 digital multimeter.
- Fluke 343A DC Voltage Calibrator. 0 to 1111.1110 volts.
- Programmable load. 300 watts. CC, CP, CR modes.
- Philips PM 5781 Programmable Pulse Generator, 125 MHz, 2nS to 100ms
- Tektronix 60 MHz oscilloscope.
- HP 100 MHz dual channel universal counter.
- BK Precision sweep / function generator.
- BK Precision pulse generator.
- Logic Analyzer, 8 channel, 24 MHz, PC based.
- 400 amp AC/DC clamp current meter / DMM.
- I2C communications monitor.
- PIC programmers and ICD.
- Programmable DC load.
- Laser tachometer.
- Omega PX02 barometric pressure standard.
- 2 x Sorenson DCR 150-35A. 0-150 volts DC, 0-35 amps. 5.25kW.
- 0-60 volt DC, 0-3 amps. Computer controlled.
- 2 x 13.8/14.1 volt 55 amp.
- 0-30 volt DC, 0-3 amps. Current Limited.
- 0-20 volt DC, 0-2 amps. Current Limited.
- 13.8 volt DC, 20 amps. Regulated.
- Many 13.8 volt DC 1 - 15 amp.
- 0 to 500 VAC / VDC low current.
- Weller WD2(M). Digital dual channel high speed controller. Computer interfaced. 150 watt high power, 85 watt medium, and 50 watt micro soldering irons.
- Metcal SP200.
- Multiple Weller WD1M 85 watt soldering stations.
- Weller WESD51. Digitally temperature controlled soldering irons. Dedicated lead and lead free stations.
- Pace SP175. Desolder station.
- Hot air rework station.
- Goot lead free temperature controller solder pot.
- 30x Microscope.
- Custom reflow oven suitable for lead soldering or low temperature drying and curing.
- Panavise clamps.
Mechanical Equipment
Welding- Miller SD180 Runner. 180 amp TIG welder. Has been used for steel, stainless steel, aluminum, titanium, and magnesium
- Millermatic 180 Automatic. MIG Welder. 230 volt. Typically setup with 25% CO2 / 75% Ar shielding gas.
- CNC Automation 3 axis CNC knee mill. Suitable for automatic or manual milling.
- Manual engine lathe.
- Mill / drill machine.
- Milwaukee dry cut saw. Suitable for burr free cutting of ferrous and non-ferrous metals.
- Delta band saw. Suitable for cutting wood, plastics, and aluminum.
- DeWalt compound miter chop saw. Suitable for cutting wood and plastics.
- Milwaukee hand held electric sheet metal shear.
- Delta compound miter saw. Custom pneumatic clamps and controls dedicated to cutting PVC pipe.
- DeWalt radial arm saw.
- Hitachi table saw.
- Laser cutter. 60 watt CO2 laser. Suitable for cutting most plastics and woods up to 1/4" thick.
- Vertical metal cutting saw.
- Wells horizontal metal cutting saw.
- Milwaukee panel saw. Horizontal and vertical cuts in material up to 1.75" thick.
- Small bench drill presses setup for standard operations.
- Hand held 1/2" Milwaukee corded and cordless drills.
- Quincy. Rotary screw air compressor. 15HP. Dried and cooled.
- Air compressor. 10 SCFM @ 100 PSI. Dried and cooled.
- Sheet metal brake. Suitable for bending 18 gauge sheet metal.
- Bench grinder.
- Belt and disc sander.
- Ridgid Model 500 pipe threader. Dies for 1/2" through 2" NPT. Including specialized dies for stainless steel
- Pipe and tubing bender. JD2.
- Arbor press, 3 ton, ratchet.
- Tubing Bender. Lakeland model 420. Dies for 1/2" and 9/16" tubing.
Shop Facilities
- 2000 square feet of dedicated shop space.
- Forklift, electric, 3,000 pound.
- Truck dock and ground level shop access.
Office Facilities
- 1,200 square foot office.
- 100 megabit fiber optic Internet connection with gigabit LAN to all work stations.
- Roof access for sensor testing.
- Vinyl cutter. 24".
- Linux and Windows work stations.
- Solidworks 2010
- Hi-Tech PICC18-STD Compiler
- CCS PCM / PCH Compilers
- Adobe Creative Suite 4
Vehicles and Buildings
- Isuzu NPR cab-over diesel flat bed truck. 8'x12' bed. DOT registered.
- Product demonstration building. Solar PV, solar hot water, and wind. Off-grid.