PLEASE NOTE
The Production Logger configuration has changed. We are in the process of updating this page and our main and specification pages to reflect the new upgrades. To discuss your specific needs, please call +1-507-454-2727.
Packages
Production Data Logger for small wind system
A perfect basic instrumentation package for a small grid tie wind system. An anemometer measures wind and the production data logger records energy produced by the turbine.
- Production Data Logger
- APRS6604 Secure Digital Card, 1 gigabyte
- APRS6503 Card reader, Secure Digital, USB
- APRS6504 Anemometer, #40R from APRS World, LLC
- Stub mast for anemometer, 28 cm (11 in)
- Printed manual
- Two conductor cable for connecting the anemometer to the production logger. Suitable cable can be found in our cables section.
- Appropriate number and size current transformers.
Production Data Logger for small wind system
A perfect basic instrumentation package for a small grid tie solar system. A solar isolation sensor measures sunlight and the production data logger records energy produced by a photovoltaic system.
- Production Data Logger
- APRS6604 Secure Digital Card, 1 gigabyte
- APRS6503 Card reader, Secure Digital, USB
- APRS6567 Solar insolation sensor
- Mounting bracket for solar insolation sensor
- Printed manual
- Appropriate number and size current transformers.
Internet module for Production Logger
$160.00 USD
Serial to Ethernet gateway for Internet enabling a Production Data Logger. Moxa NPort 5110. Includes the device server and 15 cm (6 in) cable for connecting the Wind Data Logger to the device server.
Current Transformers (required)
Current transformer, split core
$42.00 USD
Split core CTs have a removable section, so that they can be installed without interrupting the circuit.
Available in three opening sizes:
- 19 mm (0.75 in) inner diameter- 300 amps maximum. Passes 3/0 to 300 MCM cable. Available in the following amp ratings: 51, 151, 30, 50, 70, 100, 150
- 31.75 mm (1.25 in) inner diameter- 800 amps maximum. Passes 500 MCM cable. $4 additional charge. Available in the following amp ratings: 70, 100, 150, 200, 250, 300, 400, 600
- 50.8 mm (2 in) inner diameter- 1500 amps maximum. Passes 1500 MCM cable. $24 additional charger. Available in the following amp ratings: 400, 600, 800, 1000, 1200, 1500
Specifications:
- 0.333VAC output at rated current
- Accuracy ±1% from 10% to 130% of rated current
- No exposed metal
- Phase angle < two degrees
- UL recognized
- Dimensional drawing
- Split-Core Datasheet (Acrobat PDF format)
Note: the 5 and 15 amp models do not meet the published accuracy specifications. For applications where accuracy is important, we recommend using the small solid core current transformers instead.
Current transformer, solid core
$31.00 USD
Toroidal (solid core) current transformers are more compact and accurate. You must disconnect the measured circuit to install solid core CTs, so they are better suited for new wiring or permanent installation.
Available in the following sizes:
- 19 mm (0.75 in) inner diameter- 300 amps maximum. Passes 3/0 to 300 MCM cable. Available in the following amp ratings: 51, 151, 30, 50, 70, 100, 150
- 31.75 mm (1.25 in) inner diameter- 800 amps maximum. Passes 500 MCM cable. $4 additional charge. Available in the following amp ratings: 70, 100, 150, 200, 250, 300, 400, 600
- 50.8 mm (2 in) inner diameter- 1500 amps maximum. Passes 1500 MCM cable. $24 additional charger. Available in the following amp ratings: 400, 600, 800, 1000, 1200, 1500
Specifications:
- 0.333VAC output at rated current
- Accuracy ±1% from 10% to 130% of rated current
- No exposed metal
- Phase angle <2 degrees
- UL recognized
- Dimensional drawing
- Solid-Core Datasheet (Acrobat PDF format)
