This system is perfect for wind data logging in remote areas without access to AC power. The 10 watt solar panel and sealed battery will run the data logger almost indefinitely. This is our most popular package.
The Solar Powered Wind Data Logger Package features:
- Pelican 1300 Case
- 10 watt solar panel
- 7 amp/hour sealed AGM battery
- Morningstar SunKeeper SK-6 solar charge controller
- Lightning protection for all sensor channels and solar input
- Self-resetting fuse
- Stainless steel hardware
- Mounting brackets for clamping to tower
- Weatherproof cable feedthroughs
- 6' or longer solar panel cable
Click here for the Solar Powered Self-Contained Wind Data Logger Installation Guide.
Pricing:
Now you can purchase these products directly through our sister website: 
Wind Data Logger #40R package, solar powered, outdoor
$923.00 USD
Package Includes
- APRS6000 Wind Data Logger module
- APRS6504 #40R anemometer, with boot
- APRSC1000 Anemometer cable, 30.5 m (100 ft)
- Stub mast, 0.3 m (11 in)
- Self-contained enclosure
- Mounting clips for attaching to tower
- APRS6702 10 watt solar panel *
- APRS6555 Solar panel side of pole mount
- APRS6604 Secure Digital (SD™) card, 512 megabyte, industrial, -40°C to 85°C
- APRS6603 USB SD™ card reader
- APRS6559 Temperature sensor, 3 m (10 ft)
- APRS6090 Printed manual
- APRS6091 Printed installation guide for Solar Powered Wind Data Logger
Note: Solar Panel may vary. Pole for mounting not included.
Wind Data Logger package, solar powered, outdoor
$858.00 USD
Package includes:
- APRS6000 Wind Data Logger module
- APRS6500 Anemometer, assembled and tested
- Anemometer Cable, 7 m (25 ft)
- Self-contained enclosure
- APRS6702 10 watt Solar Panel *
- APRS6555 Solar panel side of pole mount
- Mounting clips for attaching to tower
- APRS6604 Secure Digital (SD™) card, 512 megabyte, industrial, -40°C to 85°C
- APRS6603 USB Secure Digital (SD) card reader
- APRS6559 Temperature sensor, 3 m (10 ft)
- APRS6090 Printed manual
- APRS6091 Printed installation guide for Solar Powered Wind Data Logger
* Solar Panel may vary. Pole for mounting not included.
Accessories:
Solar powered Data Logger enclosure - NO LOGGER OR SENSORS INCLUDED
$493.00 USD
This item is only for people that already have a Wind Data Logger and sensors. It consists of the enclosure, solar panel, wiring, battery, charge controller, and solar panel side of pole mount.
SPM10: Solar panel / sensor side of pole mount
$50.00 USD
This durable 5052-H32 aluminum pole mount provides a mounting solution for the 10 watt panel. It employs corrosion-resistant aluminum and stainless steel hardware. Assembly and installation is easy and can usually be accomplished in less than 10 minutes. The mount can either be attached to cylindrical objects (masts, pipes, etc) using hose clamps or bolted to flat surfaces.
Solar Panel not included.
Compatible with the following sensor and combinations:
- Solar panel, 10 watt (Suntech or BSP-10)
- Solar Insolation with Solar Radiation Shield (for temperature and relative humidity sensor)
- Rain Gauge with Solar Radiation Shield (for temperature and relative humidity sensor)
Pelican case lock
$12.00 USD
Lock for securing Outdoor Data Logger enclosures (Pelican cases). Manufacturer may vary.