Introduction
A universal RJ-45 to screw terminal breakout board. Great for connecting sensors and building systems.
| Measurements | ||
|---|---|---|
| Width: | 1.6" | |
| Length: | 1.975" | |
| Thickness: | 0.6" (board with connectors) | |
| Thickness with DIN Rail Clips: | 1.275" | |
| Mounting Hole Locations | ||
|---|---|---|
| Lower Left: | x = 0.200" | y = 0.533" |
| Middle Left: | x = 0.200" | y = 1.025" |
| Upper Left: | x = 0.200" | y = 1.517" |
| Lower Right: | x = 1.400" | y = 0.533" |
| Middle Right: | x = 1.400" | y = 1.025" |
| Upper Right: | x = 1.400" | y = 1.517" |
Pricing
Now you can purchase these products directly through our sister website:
RJ-45 breakout board to screw terminals, with DIN rail clips
$15.00 USD
RJ-45 breakout board to screw terminals. Includes feet and screws for attaching to standard 35 mm DIN rail. A #2 phillips (+) screwdriver is required to assemble. DIN rail not included.
Note: Does not come with DIN feet attached. Assembly required.
Discounts available when ordering in quantity: 10% for quantities of 100 or more and 20% for quantities of 500 or more.
RJ-45 breakout board to screw terminals
$12.00 USD
RJ-45 breakout board to screw terminals.
Discounts available when ordering in quantity: 10% for quantities of 100 or more and 20% for quantities of 500 or more.
DIN rail mounting clips and screws
$3.00 USD
Two DIN rail mounting clips and four #6 x 3/8" stainless steel machine screws. Clips are for standard 35 mm DIN rail. A #2 phillips (+) screwdriver is required to assemble. DIN rail not included.