Buck Horn Wind Sensor Crossarm

Introduction:

The Buck Horn Wind Sensor Crossarm is a heavy duty, stainless steel wind sensor mounting platform for AS Richards compact anemometers and wind vanes. The arm is used to securely mount two wind sensors horizontally on a common mast. The crossarm is designed to position the sensor pair 36” apart to insure that the sensors do not interfere with each other’s wind path. The wind sensors mount on the two 3” tall .50” diameter mounting posts on the arm. These posts are machined from solid stainless steel bar and welded in place for superior strength and corrosion resistance. The arm can be mounted to your own mast, horizontal boom, or directly to an AWOS tower using the center positioned female 1.0” NPT fitting on the arm. The crossarm is fabricated from tough, corrosion resistant, thick walled, ¾” schedule 80 stainless steel pipe, and electro polished for many years of service in the most severe weather.

Technical Specifications:

back to top

Pricing:

Now you can purchase these products directly through our sister website:

AS Richards, buck horn wind sensor crossarm

Please call +1-507-454-2727
for ordering details.

• 

Part: APRS6530

Weight: 6.64 lbs

The BHC-36-C-SS Buck Horn Wind Sensor Crossarm is a heavy duty, stainless steel wind sensor mounting platform for C5C series anemometers and D5C series wind vanes. The arm is used to securely mount two wind sensors horizontally on a common mast.

914 mm (36 in) span, 13 mm (0.5 in) O.D. sensor mounts, 1" female NPT, 316 stainless steel (BHC-36-C-SS).

This is a special order item that may require a two week lead time prior to shipping.

Dimensional Drawing:

back to top