Arklay S. Richards Sensors Menu▼

Arklay S. Richards Sensors Menu

Mast Adapter


Many applications require only a single anemometer or wind vane mounted on a mast or pole. For this type of application the mast adapter is available. The adapter is machined from solid 316ss bar stock for strength and corrosion resistance. The adapter has a 0.5” O.D. sensor mount on one end and a female 1.0” NPT thread on the other. This allows the use of standard pipe and pipe fittings to install the sensor. The overall length of the mast adapter is 6.0” and the 0.5” O.D. sensor mount section is 3.0”. The outside surfaces are polished to a mirror finish.

Technical Specifications:

Materials of Construction and Finish
One Piece Solid Construction Solid hex, 316 stainless steel
1.0” NPT Female Thread Inside 1.5” hex 316 stainless steel
Finish Bright high polished external finish
Physical Dimensions and Weight
Sensor Mounting Post Height 3.0 inches or 76.20 mm
Mast Adapter Overall Length 6.0 inches or 152.40 mm
Weight 1.05 pounds or 476.27 grams
Tools Required for Mounting and Installation
Pipe 1.0” pipe for vertical mast with male thread
Open End 1.5” open end wrench or large adjustable wrench

back to top


Now you can purchase these products directly through our sister website: Off Grid Options

AS Richards, wind sensor mast adapter

Please call +1-507-454-2727
for ordering details.

Part: APRS6531
Weight: 1.05 lbs

Mast adapter, 152 mm (6 in) long, 1" NPT female, solid 316 stainless steel (C-MMA-16-06).

For applications requiring only a single anemometer or wind vane mounted on a mast or pole.

This is a special order item that may require a two week lead time prior to shipping.

Dimensional Drawing:


back to top