Introduction
Bergey Wind Power produces Guyed Lattice (GL) towers in heights of 60 to 160 feet. This is a heavy duty tower that is capable of supporting Bergey's Excel 5 and Excel 10 towers when guyed. It also makes a nice heavy duty tower in an unguyed configuration when used for small loads and in short lengths. Each tower section is 10 feet long. With APRS World, LLC's GL tower accessories you can use standard Bergey tower sections. Futher details on Bergey's Guyed Lattice (GL) towers.
Pricing and Purchasing
Tower base plate for standard Bergey GL tower section
$450.00 USD
Tower base plate for Bergey Guyed Lattice (GL) tower section. Includes two 12.7 mm (0.5 in) thick steel plates. Customer supplies foundation and 229 mm x 19 mm to 254 mm x 76 mm (9 in x 0.75 in to 10 in x 3 in) A325 heavy hex bolts and hardware. Base plate is powder coated or hot dip galvanized.
A complete datasheet is available from:
http://www.aprsworld.com/towers/bergeyGL/bergeyGLBase.pdf
Tower top plate for standard Bergey GL tower section and 1-1/2" pipe
$350.00 USD
Tower top plate for Bergey Guyed Lattice (GL) tower section. Used for mounting 1-1/2" schedule 40 pipe. Requires pipe with one threaded end. Includes two formed steel plates, one adapter plate and required hardware. Customer supplies 229 mm x 19 mm to 254 mm x 63.5 mm (9 in x 0.75 in to 10 in x 2.5 in) A325 heavy hex bolts and hardware for attaching top plate to tower. Plates are powder coated or hot dip galvanized.
A complete datasheet is available from:
http://www.aprsworld.com/towers/bergeyGL/bergeyGLTop.pdf
Tower top plate for standard Bergey GL tower section and 2-1/2" pipe
$350.00 USD
Tower top plate for Bergey Guyed Lattice (GL) tower section. Used for mounting 2-1/2" schedule 40 pipe. Requires pipe with one threaded end. Includes two formed steel plates, one adapter plate and required hardware. Customer supplies 229 mm x 19 mm to 254 mm x 63.5 mm (9 in x 0.75 in to 10 in x 2.5 in) A325 heavy hex bolts and hardware for attaching top plate to tower. Plates are powder coated or hot dip galvanized.
A complete datasheet is available from:
http://www.aprsworld.com/towers/bergeyGL/bergeyGLTop.pdf
Tower top plate for standard Bergey GL tower section to bolted flange
$325.00 USD
Tower top plate for Bergey Guyed Lattice (GL) tower section. Used for mounting customer supplied flange mount mast. Includes formed steel plate, and required hardware. Customer supplies 229 mm x 19 mm to 254 mm x 63.5 mm (9 in x 0.75 in to 10 in x 2.5 in) A325 heavy hex bolts and hardware for attaching top plate to tower. Plates are powder coated or hot dip galvanized.
A complete datasheet is available from:
http://www.aprsworld.com/towers/bergeyGL/bergeyGLTop.pdf
